Need Help with Ni Tek Logic - Dive Rite

<BS Diver> wrote in message
news:iiji61hmcpn5icn1srar5ndmab4krsq7o1@4ax.com...
> Hello divers :
>
> Looks to me I do have problem with downloading stored data on the dive
> computer in to PC.
>
> I'm using Dive Rite DOCKING STATION for NITEK/NITEK 3/NITEK HE and my
> computer is Windows XP base with Ni Tek Logic software version 3.06
> which according to Dive Rite is fine with all three dive computers:
> first generation NiTek, NiTek, NiTek 3 and NiTek HE. When I try
> uploading information from the Dive Computer to my PC I'm getting
> following errors:
>
> Unable to communicate!
> Would you like to test for valid COM ports on your system?
>
> YES NO
>
> Then if I click on NO or YES I'm getting:
>
> Access violation at address 00000000. Read of address 00000000.
>
>
> I try change operating system to Win'98 & Win'95 - same problem, Com
> ports are OK, cable is OK, I also change docking station... same
> results.
>
> *^??!!%$#!#$%.... WHAT IS GOING ON?
>
> I NEED HELP. P L E A S E
>
> bsdiver@bsdivers.com
>
> THX...
>


I have seen a simmilar problem in another brand. Do you need to set the
computer to "transmit mode" before connecting it to the docking station?
Pat

<BS Diver> wrote in message
news:iiji61hmcpn5icn1srar5ndmab4krsq7o1@4ax.com...
> Hello divers :
>
> Looks to me I do have problem with downloading stored data on the dive
> computer in to PC.
>
> I'm using Dive Rite DOCKING STATION for NITEK/NITEK 3/NITEK HE and my
> computer is Windows XP base with Ni Tek Logic software version 3.06
> which according to Dive Rite is fine with all three dive computers:
> first generation NiTek, NiTek, NiTek 3 and NiTek HE. When I try
> uploading information from the Dive Computer to my PC I'm getting
> following errors:
>
> Unable to communicate!
> Would you like to test for valid COM ports on your system?
>
> YES NO
>
> Then if I click on NO or YES I'm getting:
>
> Access violation at address 00000000. Read of address 00000000.
>
>
> I try change operating system to Win'98 & Win'95 - same problem, Com
> ports are OK, cable is OK, I also change docking station... same
> results.
>
> *^??!!%$#!#$%.... WHAT IS GOING ON?
>
> I NEED HELP. P L E A S E
>
> bsdiver@bsdivers.com
>
> THX...
>


I have seen a simmilar problem in another brand. Do you need to set the
computer to "transmit mode" before connecting it to the docking station?
Pat

<BS Diver> wrote in message
news:iiji61hmcpn5icn1srar5ndmab4krsq7o1@4ax.com...
> Hello divers :
>
> Looks to me I do have problem with downloading stored data on the dive
> computer in to PC.
>
> I'm using Dive Rite DOCKING STATION for NITEK/NITEK 3/NITEK HE and my
> computer is Windows XP base with Ni Tek Logic software version 3.06
> which according to Dive Rite is fine with all three dive computers:
> first generation NiTek, NiTek, NiTek 3 and NiTek HE. When I try
> uploading information from the Dive Computer to my PC I'm getting
> following errors:
>
> Unable to communicate!
> Would you like to test for valid COM ports on your system?
>
> YES NO
>
> Then if I click on NO or YES I'm getting:
>
> Access violation at address 00000000. Read of address 00000000.
>
>
> I try change operating system to Win'98 & Win'95 - same problem, Com
> ports are OK, cable is OK, I also change docking station... same
> results.
>
> *^??!!%$#!#$%.... WHAT IS GOING ON?
>
> I NEED HELP. P L E A S E
>
> bsdiver@bsdivers.com
>
> THX...
>


I have seen a simmilar problem in another brand. Do you need to set the
computer to "transmit mode" before connecting it to the docking station?
Pat

Also, have a look at this news board. These people are having problems as
well.


http://www.scubaboard.com/showthread.php?t=87372

Pat

Also, have a look at this news board. These people are having problems as
well.


http://www.scubaboard.com/showthread.php?t=87372

Pat

Also, have a look at this news board. These people are having problems as
well.


http://www.scubaboard.com/showthread.php?t=87372

Pat

On Sat, 23 Apr 2005 07:53:11 +1000, "Pat" <spamsux@nothing.nothing>
wrote:

>
>I have seen a simmilar problem in another brand. Do you need to set the
>computer to "transmit mode" before connecting it to the docking station?
>Pat
>

Only on NiTek He

THX... Paul

On Sat, 23 Apr 2005 07:53:11 +1000, "Pat" <spamsux@nothing.nothing>
wrote:

>
>I have seen a simmilar problem in another brand. Do you need to set the
>computer to "transmit mode" before connecting it to the docking station?
>Pat
>

Only on NiTek He

THX... Paul

On Sat, 23 Apr 2005 07:53:11 +1000, "Pat" <spamsux@nothing.nothing>
wrote:

>
>I have seen a simmilar problem in another brand. Do you need to set the
>computer to "transmit mode" before connecting it to the docking station?
>Pat
>

Only on NiTek He

THX... Paul

Thank you...

On Sat, 23 Apr 2005 07:57:19 +1000, "Pat" <spamsux@nothing.nothing>
wrote:

>
>Also, have a look at this news board. These people are having problems as
>well.
>
>
>http://www.scubaboard.com/showthread.php?t=87372
>
>Pat
>